NEW Get $100 off your first service with us
Roofing NextGen Ellicott City Call

Chimney flashing repair in Ellicott City.

A leak near the chimney is rarely the bricks. It is almost always the metal flashing where the chimney meets the roof, and that can be fixed.

Get a free quote

  • Free Roof Inspection

    No charge to come out and look at your roof.

  • Free Quote

    You know the price before any work starts.

  • Answered 24/7

    Nights and weekends too. A leak will not wait.

Recent work

Real roofs. Real jobs.

Roofs we have worked on, photographed on the job. Tap or hover over a photo to see what we did.

  • Worn shingle roof with missing patches beside the same roof after replacement.

    Shingle roof replacement

    A worn, patched roof stripped to the deck and replaced with new dark shingles.

  • Stained, patched flat roof beside the same roof after a new white membrane.

    Flat roof replacement

    An old, stained flat roof replaced with a bright white membrane that reflects summer heat.

  • Roofing crew rolling out new white membrane across a flat roof.

    New flat roof going on

    Our crew rolling out and sealing a new membrane over fresh insulation boards.

  • Brick chimney with new metal flashing where it meets the gray shingle roof.

    Chimney flashing repair

    New metal flashing where the shingles meet the brick, so the chimney stops leaking.

  • Skylight with metal flashing around its frame set into a brown shingle roof.

    Skylight on a shingle roof

    A skylight set into a shingle roof and flashed around every edge to keep water out.

See more of our work

Reviews

What neighbors say.

Real reviews from homeowners, straight from our Google listing.

  • My ceiling had water spots so I reached out to Next Gen, and they found the problem with a leakage in the roof connecting to the house. Anthony came and fixed it within 2 hours and was significantly better in price + quality than any of the other people we had looking at it. They will be my go-to for a while, as well as for my friends and family, and Anthony is especially kind!

    Suleman Abbasi Google review
  • Super reliable team! I would highly recommend for any of your future projects.

    Keylin Perez Google review
  • Great to work with!

    Dulce G Monzon Google review
  • Great price

    Gabs Villatoro Google review

Leave a review

Signs of a chimney flashing leak

  • A water stain on the ceiling or wall beside the chimney
  • Damp or stained wood around the chimney in the attic
  • Loose, bent or rusted metal where the chimney meets the roof
  • Tar or caulk smeared around the base of the chimney
  • Water running down the inside of the chimney walls
  • Crumbling mortar just above the roof line

How chimney flashing works

A chimney is a big block of brick sitting in the middle of a sloped roof, and rain hits it from every side. Good chimney flashing is two layers of metal. The first is tucked under the shingles and turns up against the brick. The second is set into a groove cut into the mortar and folds down over the first, so water running down the brick always lands on the outside. On the uphill side, a wider chimney also needs a small ridge to split the water around it.

  • Free roof inspection
  • Free quote
  • Answered 24/7
  • Based in Ellicott City
Brick chimney on a shingle roof with new metal step and counter flashing.
Chimney step flashing and counter flashing

Why chimney leaks keep coming back

The most common chimney fix we find is a thick layer of tar or caulk spread over the joint between brick and roof. It looks sealed, but it dries, cracks, and pulls away from the brick within a few seasons, and water gets trapped behind it. Older homes around Ellicott City often have original chimneys where the mortar has also worn, letting water into the joint above the flashing.

The inspection and the quote are free

We come out, get on the roof, and tell you what we found and what it would cost to put right. There is no charge for that visit, and you are under no obligation to book the work.

What the repair involves

We remove the old flashing and any tar, lift the shingles around the chimney, and put in new step flashing under the shingles and new metal set into the mortar above it. Where the mortar is too worn to hold it, we point that out. The shingles go back down, and the chimney is sealed the way it should have been.

How it works

How it works.

Four steps from the first call to a sound roof.

  1. Call or send the form

    Tell us what is going on with the roof. We answer 24/7.

  2. Free roof inspection

    We come out and look at the roof itself before anyone talks price.

  3. Free quote

    You get the price for the work. Nothing starts until you say yes.

  4. We do the work

    The repair or the new roof, done, and the site cleaned up after.

Get a free quote

Why us

Why homeowners call us.

A local roofing company in Ellicott City that picks up the phone.

  • Ladder against a shingle roof edge with work gloves and a clipboard.

    Free Roof Inspections

    We come out and look at the roof for free, whatever you end up doing.

  • Red rotary landline telephone with its handset resting on a coiled cord.

    Answered 24/7

    Storms do not keep office hours, so we do not either. Call any time.

  • Samples of asphalt shingles, a metal roof panel and flat roof membrane.

    Every Kind Of Roof

    Shingle roofs, flat roofs and metal roofs, put in new or fixed.

  • Blank price tag on a red string with a red check mark.

    Free Quotes

    You see the price before any work starts, and there is no charge for it.

  • Leather roofer's tool belt holding a hammer, snips, tape measure and caulk gun.

    One Call For The Roof

    Roofs, gutters, skylights, flashing and attic vents, all from one crew.

  • Red map pin standing on a small square of shingle roof.

    Based In Ellicott City

    Close to home for every town we cover across Howard County, MD.

Common questions.

Does a chimney leak mean the chimney needs rebuilding?

Rarely. Most chimney leaks come from the flashing where it meets the roof, which can be replaced without touching the rest of the chimney.

Can you fix chimney flashing without a new roof?

Yes. We lift the shingles around the chimney, replace the flashing, and put the shingles back.

Do you repair the chimney bricks too?

We deal with the flashing and the roof around the chimney. If the brick or mortar higher up needs work, we will tell you so you can have it looked at.

Roof trouble? Call any time.

Free roof inspections, free quotes, and a phone that is answered 24/7.

Call now Get a free quote